The tools in the workshop are dirty and bad. This cabinet can help you

Manufacturing enterprises have a lot of tools to debug equipment, but more than 90% of the enterprise tool management is disorganized, to see if your factory is such a state!
Is this the tool lying on the body, stacking up the rohan?
If the factory is such a scene, the time to find tools will delay a lot of production time.
Common finding tool waste

1, debugging equipment: maintenance personnel running around to find tools = delay maintenance time = delay production time = production efficiency decline;
2, change the line to change the specifications: many companies change the line to change the specifications or change the mold, the time to find tools or screws reaches 30%-50%, and the real time to change the machine is not long;
3, such tools: A post and B post tools to use, A post has been waiting = inefficient
Tool management hierarchy
Lowest level tool management
Tools placed on the table above, tools less, or more, a glance can not come out.
Early level tool management
Tools have been preliminarily arranged and placed neatly. But the location of each tool, the name is not known. This method is the primary level.
Mid-level tool management
This tool management, missing tools can be seen at a glance. This method has a disadvantage, the tool is easy to put crooked when it is placed, which does not comply with the principle of easy access and easy management, resulting in the overall unaesthetic. Just look at the picture. And this graph has no identity.
High-level tool management
High-level tool management, the use of tool cabinets, and in the cabinet to do a variety of signs and tool placement planning, how to put will not be wrong, will not be crooked. And the logo is clear, everyone knows that after the shutdown to find tools, found in an instant, improve work efficiency.

In the perfect daily management of the workshop, tool management seems insignificant, but it can often directly affect the production and improve the work efficiency of the staff.
Tool cabinet Features:
1. Cabinet body adopts three-piece lap design, adopts high-quality cold-rolled steel plate through advanced CNC equipment cutting, punching, folding, welding and other processes to make molding, and through advanced automatic electrostatic spraying process surface treatment, beautiful, strong and durable.
2. Drawer adopts special guide rail to carry large weight. Monorail drawer bearing 80kg, opening rate 85%; Dual guide drawer bearing 140kg, opening rate 100%. Bearings are used between the drawer and the guide rail for flexible push-pull.
3. The horizontal and vertical dividers in the drawer can be adjusted freely, and can be separated at will to store items of different sizes, and unit parts boxes can also be selected to separate them.
4. Drawer equipped with a limiting device: completely pull out will not fall off; It can also be configured with safety buckle, so that the drawer will not slide out by itself, safe and reliable use.
5. The whole tool cabinet drawer with a lock lock all the drawers, easy to use.
6. Users can combine the recommended tool cabinet length, width and dimension into their own satisfactory tool cabinet. It can also be configured with single or double track drawers in the same tool cabinet to fully meet the requirements of users.

7. The top of the cabinet can be optional: green stripe rubber, edge, drawing board, movable back drawing, square hole hanging board or shutter hanging board, to increase the use of tool cabinet function.
8. The bottom of the cabinet can be selected: flat pad, rectangular pad, corner pad, skirt pad, adjustment pad, to meet the different requirements of users.
9. After the tool cabinet is installed with casters, it becomes a mobile tool cabinet.
10. Configure the central lock system and interlock device.
After using the tool cabinet, the tools will not be placed in confusion, to achieve standardized management of the workshop, improve work efficiency, you need a set of high-quality tool cabinet.